Liquid Gas Pump-manufacture,factory,supplier from China

Suitable MediumLO2、LN2、LAr、LNG、LCzH4、LNzOApplicationGas supply systems for large and medium steel millsFilling of dewar bottlersFilling of storage tanksOthermedium pressure air supply systemsMain Technical ParametersFlow:300-35000L/hMax outlet pressure:3.0MPa-8.0MPaOptional ConfigurationStationary motor/Electromagnetic speed regulating machine/Variable frequency speed motorSafetyvalve/Cryogenic stop valveGas returninterlocking deviceAir outlettemperature interlocking deviceAir outlet pressure interlocking deviceWorkshop    Certificate       

A vaporizer for liquid natural gas (LNG) is a device used to convert LNG from its liquid state to a gaseous state for use in various applications. There are several types of vaporizers used in LNG systems, including:Ambient air vaporizers: These vaporizers use ambient air to heat and vaporize the LNG. They are often used in applications where electricity is not readily available.Shell and tube vaporizers: In this type of vaporizer, LNG flows through a series of tubes inside a shell.

LCO2 Filling ProcessLiquid carbon dioxide tank trailer - Liquid carbon dioxide tank - Filling pump - Filling steel cylinders. Liquid carbon dioxide (with a purity of 99.985%) is transported by a liquid carbon dioxide tanker to the plant and unloaded into the liquid carbon dioxide tank (maintained below -56 degrees Celsius).

1. Boiler proprietary technology Full wet back combustion chamber, combustion chamber and rear tube plate trigger edge butt joints, boiler 100% full butt welding, the lowest stress, more reliable quality. 2. Large diameter corrugated furnace chamber Boiler combustion chamber consists of a large diameter corrugated furnace chamber, large combustion space, fuel combustion, effective absorption of thermal expansion, large radiation heating surface. 3.

An industrial gas pressure regulator is a device used to control and regulate the pressure of gas in various industrial processes. It ensures that the gas flowing into a system is at a safe and consistent pressure level, helping to protect equipment and ensure efficient operation.These regulators can be used in a wide range of industrial applications, such as in manufacturing, power generation, refining, and more.

The re-gasification units play a crucial role in the LNG supply chain by allowing LNG to be easily transported and distributed as natural gas for various uses. The use of advanced technologies like vaporizers and heat exchangers helps efficiently convert LNG from a liquid to a gaseous state, making it ready for consumption. If you have any specific questions or need more information about re-gasification units, feel free to ask!The ambient air vaporizer you are using is highly efficient, environmentally-friendly, and energy-saving.

An LNG refueling station consists of an LNG storage tank, pump skid with submerged pump, tank pressurization vaporizer, truck unloading vaporizer, EAG(Energy-Adjust Gas) heater (there will be corresponding variations in these three vaporizers based on different processes), and a liquid dispenser.It is divided into four main types:1.Skid-mounted LNG refueling station2.Standard LNG refueling station3.L-CNG (Liquefied to Compressed Natural Gas) refueling station4.Mobile skid-mounted LNG refueling stationLNG/CNG/NG Gas Filling Station Work ProcessWorkshopDeliverySuccess Projects

LNG Vaporizers are heat exchangers used for degasifying liquefied gases which are stored as a liquid under cryogenic temperatures.

Exterior Design: You can choose the color, pattern or decals to personalize the exterior of the tank. This can include camouflage patterns, national flags, or custom designs.Armor and Protection: Depending on the tank's use, you can opt for different armor and protection upgrades to enhance its durability and survivability in combat situations.Weapon Systems: You can customize the main gun, secondary armaments, and other weapon systems based on your requirements.

Ambient Air Vaporizer designed to efficiently vaporize cryogenic liquids such as LCO2, LOX, and LAR by utilizing the temperature difference between the cryogenic liquid and the surrounding ambient air. The vaporizer model CNZH-950/100, with a working pressure of 100 bar and a design temperature of -196°C.

A buffer tank is a type of storage tank used in various industrial, commercial, and residential applications to store and manage liquids or gases.

Argon is most commonly used as a gas, although it may be transported and stored in liquid form. Liquid argon is produced in large quantities at air separation plants.The Benefits of Using ArgonIncreased insulation: Argon conducts heat slower than oxygen, making argon gas the perfect insulator for applications such as double-glazed windows and scuba diving dry suits.Reduced costs: Argon is an abundant inert gas, making it cost-effective to obtain and use in large quantities.Limited toxicity: Argon is non-toxic.

PSA (Pressure Swing Adsorption) technology is a revolution in Non-Cryogenic Air Separation and Oxygen Generation technology uses special grade of ZMS (Zeolite Molecular Sieve).The compressed air is passed through a twin tower PSA module interconnected with automatic change over valves. After passing through a refrigerated dryer air gets dried. Dried compressed air will now come in contact with bed of zeolite molecular sieves(ZMS). Zeolite Molecular Sieves are special grade of adsorbent which have the property of preferential adsorption of nitrogen molecules.

Cheaper and Less BulkyBecause one liter of liquid nitrogen produces 641 liters of gaseous oxygen, transporting and storing it as a liquid takes less space and is less expensive than moving and storing it as a gas under high pressure. Although liquid nitrogen is cost-effective for large-scale facilities, the bulk liquid used to fill the tanks is produced at a cryogenic air separation unit.

Liquid oxygen is commonly used in metal cutting operations due to its ability to facilitate combustion and increase the efficiency of the cutting process. When combined with a fuel gas such as acetylene, propane, or natural gas in a cutting torch, the high-pressure oxygen stream reacts with the metal at an elevated temperature, causing it to burn and create a metal oxide.

CO2 is stored in liquid form. To change the liquid to a gas, a vaporizer is used in the system so the liquid supply can keep up with the draw you need, whether you’re using your gas as a refrigerant or to carbonate a beverage. This piece of equipment is crucial to uninterrupted operations, which means each line requires a vaporizer and each of these vaporizers must be maintained as separate equipment. Our Workshop                        Our License

Suitable MediaLO2、LN2、LAr、LNG、LCO2、LNH3、LC2H4、LN2O、LC3H8、LPGScope ofApplicationUsed for the gasification ofvarious industrial gasesMain Technical ParametersGasification capacity:50-60000Nm*/hWork pressure:0.8MPa-40.0MPaOptional ConfigurationFor the materials of the cylindrical shell ,you can choose carbon steel or stainless steel.Sound and light alarm for high and low air temperature.Install emergency cut-off device.The whole equipment has a skid-mounted desiqn.We can desian and produce according to the standardof electronic grade.It can use siemens electrical apparatus.Explosion-proof electri

LNG containerized refueling Station integrates storage tank, submerged pump, vaporizer, and LNG dispenser in to a containerized skid. Except the control system and instrument system which can be installed outside the skid. This station can be put into operation in a short period of time after simple installation and erection.Workshop         Delivery          Install Site         

Liquid oxygen is a cryogenic liquid. Cryogenic liquids are liquefied gases that have a normal boiling point below –130°F (–90°C). Liquid oxygen has a boiling point of –297°F (–183°C).Because the temperature difference between the product and the surrounding environment is substantial—even in the winter—keeping liquid oxygen insulated from the surrounding heat is essential. The product also requires special equipment for handling and storage.Oxygen is often stored as a liquid, although it is used primarily as a gas.

The main equipment includes LNG storage tank, LNG cryogenic pump, LNG vaporizer, LNG dispenser, and skid base. In addition, there are pipeline systems, control systems, and supporting facilities. The design capacity of a single tank is 30m3, with a design pressure of 1.2MPa, a design temperature of -196 to +60°C, and an evaporation rate of ≤0.2%.Workshop           Delivery        Related Projects   

A cryogenic argon tank, also known as a liquid Argon tank is a specialized container designed to store argon gas in its liquid form at extremely low temperatures.Cryogenic argon tanks are constructed with double-walled vessels or vacuum-insulated vessels to minimize heat transfer and maintain thelow temperatures required for the storage of the liquid argon.Cryogenic storage tanks support versatile applications across industries, enabling the efficient utilization of cryogenic substances.

Compared with other types of traditional power, natural gas power has significant advantages of low carbon and pollution, outstanding flexibility, and greater depth of peak shaving. Consequently, it is the relatively ideal peak shaving resource. In terms of low carbon and pollution, gas power emits 50% less CO2 and 80% less NOx than coal power does. Moreover, there is almost no SOx, particulate matter, solid waste, and heavy metals (such as Mercury) emission of gas power. Regional coordinated peak shaving is necessary for the smooth operation of power plants.

A cryogenic storage tank is a specialized type of tank designed to store liquefied gases at extremely low temperatures. Here is a general overview of the process involved in using a cryogenic storage tank:Liquefaction: The gas is first cooled and compressed to convert it into a liquid state.

A CO2 vaporizer is a device designed to convert liquid carbon dioxide (CO2) into a gaseous state by heating it through a water-circulating and heating system. This process involves a shell and tube heat exchanger that facilitates the conversion of CO2 from liquid to gas form.CO2 vaporizers are commonly used in various industries and sectors where gaseous CO2 is required for specific applications.